Bike for singletracks, tours and in enduro races
Sunrise … the smell of the forest, jump, sharp bands and fly over the rock section. This one sentence defines the passion that gives the ride on lightweight and agility Zumbi F11 27.5” – 100% Enduro. Feel the flow on downhill tracks and climb fast. This is the bike for you.
This BOS Edition bike series is equipped with the best BOS suspension to emphasize their uniqueness, and give the user a sense of pride. Each of these is delivered along with a certificate confirming its exceptional value. Engraved unique serial numbers indicates a short exclusive bike series. Moreover, fully hand- painted frame qualifies this bike to be identified as CUSTOM.
Additionally hand-painted model of the BOS EDITION concept will guarantee envious glances. Dedicated for the racers competing in the cup standings worldwide- now available for you
‘It’s a proper ‘Rock And Roll’ bike which loves to be thrown into corners and encourages you to late-brake everything’
Enduro MTB Magazine
Zumbi F-11 27.5” with 160mm of travel enables perfect tabletops and the drop with a smile on your face. This is an all-rounder bike for enduro and all-mountain. Race proven in the Enduro World Series and Mega Avalanche. High quality components from Raceface and Shimano, top quality BOS suspension with a perfect proprietary floating pivot suspension system (FPS) make this bike the ultimate ride machine, which will handle the roughest terrain with ease when exploring the World’s best singletracks
Zumbi brings you confidence: perfect stability, agility on challenging tracks, joy ride and pride of having a bicycle labeled with an ‘F’ sign. Ride it uphill like a marathon bike, it descends almost like a downhill sled, giving the rider an unbelievable riding experience.
This gives the rider, an amazing feeling of freedom and the opportunity to such a ride, which has not been experienced so far.
The bike designed to meet the requirements of masters; everything is aimed at maximum control. Properly selected geometric parameters provide the perfect control of the bike, even in extreme ride on downhill tracks. After all, Zumbi was designed for the needs of racers who confirmed the sporty character of the bike winning numerous medals. Years of research on perfect geometry led us to obtain parameters that combine riding convenience and sporty character of models, labeled ‘F’ belonging to the mtb sports.
|Top tube lenght||585mm||600mm||620mm||635mm|
|Seat tube lenght||420||444||470||495|
|Head tube angle||66||66||66||66|
|Seat tube angle||74||74||74||74|
|Head tube lenght||115mm||115mm||120mm||120mm|
TECHNOLOGY OF ZUMBI BIKES „F” SERIES
- Zumbi frames are 100% made of uniform, expensive and most durable aircraft aluminum 7020
- No interference in the structure of the material, ensures its originality and ultimate durability
- Low weight of Zumbi F11 frame – 3000g for size (M)
- Innovative concept of mass distribution with low center of gravity gives the possibility of spontaneous reaction, offensive characteristics, agile riding and clashes with bumps
- Owing to the refined pattern of lengths of individual pipes, the rider has the ability to maintain a comfortable body position during a whole day or several days of riding
- Optimally selected angles, allow good control of the bike in the bands and slips
- Carefully selected, aerodynamic solutions optimize: driving dynamics, stability and control of the bike
- We lowered the air resistance by reducing the aerodynamics – improving startup performance and riding comfort
- TTechnology of the force system, combines the sum of internal and external forces acting on the bike while driving, and with the appropriate setting of the suspension parameters, precisely lead the cyclist out from the difficult situation on the track
- The connecting elements are made by ultra modern CNC machines, and their construction, thanks to the appropriate technology and design, influences the exceptional side stiffness of the bike and saves further grams in the frame
- Sensitive elements of the rear triangle are made using inlet technology
- Suspension works in system with a virtual rotation point (FPS). It works in a progressive way supporting the work of the damper
- Suspension is characterized by the lack of influence of braking on its function
- The suspension is designed to increase pedal efficiency while eliminating chain jerking and suspension pumping
- Internal cable lead, a method that guarantees easy servicing and freedom when steering the handlebars
- Tapered head of the frame, ensures better bearing durability, allows the head of the frame to be connected to a larger diameter pipe, which has a significant effect on the rigidity of the bicycle, and also affects the weight of the entire frame
- The 12mm rear hub and the use of a special hook provide the right connection of the wheel hub with the frame, which affects the stiffness of the rear triangle
- Regardless of the painting method, top-quality varnishes are used, providing a fantastic color effect at the same time
- Only aluminum frames are subjected to an electrochemical anodizing process consisting in the production of an oxide layer on the coating enabling the chemical substance to penetrate the coating together with the color into the frame structure, guaranteeing a 100% longevity
In addition, Zumbi Cycles bikes are equipped with the best components from FOX, Cane Creek, BOS Shimano, Race Face, Maxxis, DT.
Floating Pivot Suspension System
Full suspension – for the best riders
The passion for precision, combined with years of cycling experience contributed to the construction of one of the world’s best mountain bike suspension systems- the FPS System. It uses four, perfectly calculated, pivot points that determine the initial and final leverage ratios; The FPS System stays fully active and isolated from braking and pedaling forces even on very hard terrain. It reduces to the minimum the possibility of losing precious seconds during a downhill race and fights for the podium.
The system is used in the following Zumbi Cycles frames and bikes: F44 27.5-inch (downhill); F22 27.5-inch (super enduro); F11 650B/27.5-inch (enduro / all mountain); F11 29-inch (trail / tour); as well as ZUMBI – BOSH E-BIKE and PINION system ones.
Thanks to precise calculations carried out in ZUMBI LAB and tests in the field, we created the technology of virtual pivot point, moving on the mathematical calculated curve. The Rider feels as if they were flowing and the FPS system responds to commands and obstacles, as though it was programmed in the bike. Gear ratios are selected so that the suspension from the beginning of deflection has a slightly progressive nature, offering increased sensitivity to small shocks and tactile progressions during high jumps, avoiding a sudden banging. Therefore the FPS system was described by the players of the Downhill World Series ‘a cushion suspension system’
build the FPS system we use our technologies: CNC revolution, FT-7020, FT-parts. Therefore, all four pivot axles in bike are made from high quality materials such as titanium alloy or stainless 6Al4V CrM. All pivot points, rotate on high-class sealed bearings of enlarged diameter or optional ceramic (further reducing weight and guarantee higher efficiency in extreme conditions), thereby increasing their strength and vitality. FT-7020 technology is used to build the frame connectors, precisely cut from a block of material by CNC tools. (See CNC revolution) All these elements influence the extreme stiffness of the frame, which results in precise control of the bike under extreme overload.
The operation of the system is supported by the damper precisely set and adjusted to the suspension curve. Owing to its appropriate location, we reached perfectly low gravity center -exactly where it SHOULD be – just under the racer. In this way the Zumbi bike is perfectly balanced, stable and agile, which gives a great feeling both while fast singletracks, jumping drops and taking bands.
Our video tutorials and training sessions will show you how to set the suspension parameters. Learn more … Follow us YouTube
Each our frame is carefully and meticulously handmade in Polish manufacture and thus we offer the possibility of lifetime warranty for the Zumbi a Cycles frame. In order to guarantee your bike lifetime warranty please send back the scan of Warranty Card filled in by the Professional Service on the following address: [email protected]
Within 30 days of the purchase
Next register your bike in the external anti-theft bike registration system.
Th final prerequisite is to pay the amount of 199 euros one-off verification fee in our bank account.
Bank account details are given at the link below (FAQ)
STANDARD FIVE-YEAR WARRANTY
The quality of our bikes is our top priority. That is why we offer a standard warranty totalling five years from the date of the purchase for frames of the 2016 edition and two years warranty for all bikes.
All terms and conditions are described in the user manual.
Click here for the warranty claim.
RETURN POLICY – fourteen days.
We do hope that your decision to purchase a bike was carefully planned and that you will want to keep it. We promise that in rare cases when the bike was not the one you wanted, we will help you return it without any complications. Please remember that our experts are at your disposal throughout the purchasing process.
Click here for the return within 14-day period.
This is an incredible and prestigious service available to all of our customers who purchased a bike or frame. We give you the opportunity to change the image of your bike whenever you feel like it, but above all we take care of it and offer professional support service.
If you happen to replace the component in your timeless frame or just wish to repair it, even ten years from now- just send it to Zumbi. This is what the timelessness is about. Maintenance services are divided into paid and free ones, but our service is always there for you.
You can also use Shimano Service Center
We understand that you push your bike to the limits, but accidents can happen. The warranty does not cover accidents. In such cases we offer a crash replacement program that allows you to obtain a new frame (without dumpers) or its parts in an inexpensive way. The option is available for the first owners of the bike and frames within three years of purchase.
Contact us, describe the crash and attach photos of the damaged frame. We will take care of your bike as soon as possible, so that you can further enjoy it.
We reserve the right to suspend this service in individual cases, if we determine that the damage was done on purpose.
Option available for all of our clients. Our bikes are ready to be pushed to their limits, because they are supposed to give you a lot of riding emotion. Some frame parts wear out in a natural way, but you can buy spare parts in our web shop.